This is an old revision of the document!
a
How to use a Brad Nailer
Brad nailers are an essential tool used by carpenters all over the world. For this tutorial you will be learning how to build a simple frame for an action figure to rest inside.
| Needs | Name |
|---|---|
| Material | Wood |
| Tool | Brad Nailer |
| Material | Nails |
| Tool | Safety glass |
| Tool | Ear protection |
| Tool | Air compressor & hose |
| Tool | Nails |
| Tool | Clamp |
Safety 1st
- When you walk into the lab, you want to go to the safety station and grab glasses and a pair of earmuffs.
- Make sure to wear closed toe shoes and long pants as well for safety.
- If you have any questions please refer to a lab assistant during open lab hours.
- DO NOT POINT THE BRAD NAILER AT ANY LIMBS, PERSON(S), OR THING THAT IS NOT WOOD.
- Do not push the safety switch while plugged into the air compressor unless the nail is ready to be driven into the wood.
Let's build
- Put on your glasses and earmuffs
- Take your wood that you will be using to the skill saw for cutting, put the angle to 45 degrees for desired edge. (Please refer to the chopsaw page for further assist.
 Temp caption |
 Temp caption |
 \\cupcake reference |
 toy |
 \\my rose |
 using |
 \\Captionnn |
 captionnnn |
— Michael Vaughns 2024/09/10 05:54